If you
cast you make an identical clone with same
flan shape and centering. You take an imprint of
obverse of the coin and on imprint of the
reverse of the coin which will be the 2 casting mould halves.
Cast fakes will castng problems like, softer details, circular holes from gas bubbles and or pearls and or casting defects and on edge a casting seam where the two mould halves were joined together and where the channel
had been to fill liquid metal will be sprue, the casting seam and sprue will be removed often by fogers with a file or with polishing.
Transfer dies you take an imprint of the
obverse and one of the
reverse.
You make from this imprints transfer dies using casting or electroplating.
With this dies you can strike or press transfer die
fakes, which can so if struck have new characteristics from striking like double struck details or slippage, the planchets and centering is then different than on the authentic mother coin and the
die axis can be different.
In ancient times there
had been a different method to make transfer dies you have an empty die and heat it to make it softer, you then hammer the coin into the die so you
mint the coin design into the die but the
reverse of the coin will be destroyed by hammer.