Last additions - Evidence of Casting |
Temple of Bacchus 25 viewsCoin sold at Baalbek Christian MJun 30, 2023
|
|
Evidence of Casting837 viewstypical cast:
very soft details
underweight
Weight : 18.47gr
Size : 29mmokidokiNov 16, 2019
|
|
Circular holes from air bubbles from casting.953 viewsHadrian Denarius 2.7okidokiMay 31, 2019
|
|
Evidence of Casting - Casting bubbles562 viewsRoman Republic, P. Maenius Antiaticus
Casting pits (tiny holes) on the reverse.
Corrosion can be excluded here.
The coin was offered in November 2018 on ebay by fake seller diosesdelolimpo.
Reference: Crawford 249/1 Germania MagnaNov 18, 2018
|
|
Missing Material with round edges225 viewsMissing material with very round, polished edges may be an indication of cast. When the metal is filling the mold it does not fill it completely - circled red in the middle. There is a small cast hole is right next to it.
The coin was exposed as a cast by finding a duplicate.Nikola KFeb 13, 2018
|
|
Circular holes from air bubbles from casting.843 viewsPits (holes) from corrosion are often irregular shapes and are often bunched together, pits from casting than from casting are mainly round. More pitting on one side than the other may be an indication of casting since the side that was up will contain more holes (but it isn't unusual for one side to have more pitting from corrosion too).
Joe SermariniFeb 09, 2018
|
|
Circular holes from air bubbles from casting.944 viewsPits (holes) from corrosion are often irregular shapes and are often bunched together, pits from casting are mainly round. More pitting on one side than the other may be an indication of casting since the side that was up will contain more holes (but it isn't unusual for one side to have more pitting from corrosion too).Joe SermariniFeb 09, 2018
|
|
Identical flan shape with legend recut in mold223 viewsExample of a cast coin which differs to original and other casting twin due to recutting of the mould. In this case identified by a blundered legend.
Identified by FORVM member Din-X with the following observations: 'The flan shape is almost identical but it seems like that some details were wrong recutted into the mould for example N CLAVDIVS CAE[SAR AVG GERMANICVS instead of TI CLAVDIVS CAE[SAR AVG GERMANICVS. First letters on the obverse could be a TI and not a N! So how can a TI can become a N without wrongly recutting in the dies? Tooling means that material is removed to add details = tooling only removes material but for connecting the T with I and make it to a N extra material must have been added. On the right side on the reverse on both the last part of the legend on the right side is missing ([INA CYTHERO CAPITONE), which is on the host/mother due to wear. The edge crack at 12 o´clock obverse and 5 o´ clock on reverse was filled at the cast fake.'peterpil19Dec 23, 2017
|
|
Evidence of Casting - Magnified Surface212 viewsSicily, Fourth Democracy (289-287), Syracuse, Bronze, c .289-287 BC; AE (g 7,73; mm 20; h 6); ΔIOΣ EΛΛANIOY, laureate and bearded head of Zeus l., Rv. [ΣYPAK-OΣIΩN], winged thunderbolt. CNS II, n. 148; SNG Copenhagen 782; SNG ANS -.
Rare
Cast known from clones. Most cast coins will not have this sort of rough surface and similar surfaces can also result from corrosion. Joe SermariniAug 16, 2017
|
|
Evidence of Casting - Casting Seam720 viewsOften casting seams are subtle, like this one. Joe SermariniAug 11, 2017
|
|
Evidence of Casting - Soapy, Impossible Edges181 viewsThe edges of this cast fake are a 100% give-away. They look nothing like a genuine coin edge. Joe SermariniAug 11, 2017
|
|
Evidence of Casting - Metal Filled Crack, Raised Edge on Rim, Soapy254 viewsThe metal filled crack is a 100% certain indicator of a cast fake and makes this an obvious fake to even moderately experienced collectors. The raised rims on the obverse and reverse are sometimes found on genuine coins due to edge bumps, but are also common on cast fakes. The details are a little soapy, another indicator of a cast fake.
Antoninus Pius Denarius
Obv: ANTONINVS AVG PIVS PP, Laureate head right
Rev: COS IIII, Clasped hands holding caduceus between corn-ears
cf. RIC 136
Cast Joe SermariniAug 03, 2017
|
|
GENUINE - Evidence of Casting - Pits Caused By Fire Damage247 viewsWhen an ancient coin has been burned in a fire, the flan may be warped, have lamination defects (flaking surfaces), and will likely have raised bubbles, and unusual pits. Bubbles are created when small pockets of gas within the flan expand due to the heat. If the top of a bubble breaks off it will leave behind a pit.
Fire damage pits do not look like pits from casting bubbles. On this example the lamination defects within the pits are clearly visible. A casting bubble will not look like this. Joe SermariniFeb 28, 2016
|
|
|
Evidence of Casting - Pearls195 viewsYou are unlikely to see such extreme examples. Most forgers would probably remelt this one. Ilya ProkopovMay 14, 2015
|
|
Evidence of Casting - Pearls182 viewsReverse silver Roman coin.
The presence of bubbles - a sure sign of casting.Ilya ProkopovMay 14, 2015
|
|
Evidence of Casting - Clear Casting Seam480 viewsTyre, silver tetradrachm, Laureate head of Melqarth, lion's skin knotted at neck / TYPOY IEPAΣ KAI AΣYΛOY, eagle standing left on beak of ship; in left field club and date monogram, monogram right field
Weight:7.71g / Diameter.30.40mm
BMC Phoenicia, pg 240, #114; Sear 5918v
Sold on Ebay as authentic / Bad copy of Biblical shekel with Melqart with obvious casting seam.
Submitted by AradosAradosJul 02, 2014
|
|
Evidence of Casting - Bubbles, Inclusions, Edge Seam and File Marks973 viewsJoe SermariniFeb 28, 2014
|
|
Evidence of Casting - Overweight301 viewsThis is a copy of Maxentius, AE follis, 22 mm, 9.22g, Ostia mint. Obv: IMP C MAXENTIVS P F AVG, laureate head right, Rev: AETERNITAS AVG N, the Dioscuri Castor and Pollux standing facing each other, each holding sceptre and holding a horse by the bridle. Mintmark MOSTP. RIC 35. This coin is a brass cast and is very heavy for the issue. novacystisMay 01, 2012
|
|
Evidence of Casting - Lost Wax Method Example with Fake Patina422 viewsComposition made with pictures submitted by Remoneda to the Spanish Forums OMNI and Imperio-Numismatico.
1.- The mold of wax used in the micro-fusion (Lost-wax casting)
2.- Recently cast and before cleaning and mask, the casting sprues are still there.
3 and 4.- The finished replica, with different false patina, ready to be sold
Carthaginian Empire
AE 1/2 Chalkus, Carthaginian Empire (Spain, Italy?) mint
Obv: Male head helmeted/Ares left.
Rev: Horse standing right, head turned back.
Alvarez Burgos #517; Corpus Nummum Hispaniae Hispano-Cartaginesa #73mdelvalleJan 06, 2012
|
|
Evidence of Casting - Excess Metal547 viewsHere we see excess of a metal from poor packaging for casting. This is an extreme example that most forgers would just remelt. Similar defects may be found on a genuine coins resulting from a broken die, but a broken die flaw will not have the same soft rounded appearance.Ilya ProkopovJan 06, 2012
|
|
Evidence of Casting - Rough cast268 viewsThis is an example of a very harsh and failed casting coin. Ilya ProkopovJan 06, 2012
|
|
Evidence of Casting - Wax Copies Used to Make Molds285 viewsGroup of mold of wax used in the production of replicas/fakes by Lost-wax casting.
Picture facilitated by Remoneda in the Spanish Forums Omni in May/2010 and Imperio-Numismático in Jul_2010.
mdelvalleJan 06, 2012
|
|
Evidence of Casting - Examples of Wax Copies Used to Make Molds384 viewsGroup of mold of wax used in the production of replicas/fakes by Lost-wax casting.
Picture facilitated by Remoneda in the Spanish Forum Omni in May/2010
The wax copy was made from a genuine coin in a mold, probably made with material used by dentists to take molds of teeth. The edge of the wax and other details can be modified to remove evidence of casting, remove flaws on the original coin, sharpen detail and to make each fake coin unique. Another advantage of wax is that a mold can be made without a seam. Instead of removing the seed from the mold by opening two halves, the mold is heated and the melted wax is drained from the mold. The mold is broke to remove the fake coin, which will have no seam.
mdelvalleJan 06, 2012
|
|
92 files on 4 page(s) |
1 |
|
|